Towertalk
[Top] [All Lists]

[TowerTalk] newbie, Installing a 80' crank up .

To: <towertalk@contesting.com>
Subject: [TowerTalk] newbie, Installing a 80' crank up .
From: Guy Olinger, K2AV" <k2av@contesting.com (Guy Olinger, K2AV)
Date: Sat, 9 Oct 1999 12:56:06 -0400
I have to second that. I am putting up a Trylon 80' self-supporting tower. It is
45 inches across at the base, and will have 8-9 cubic yards of concrete with
reinforcing rods in the base.  The thing you describe seems like a tinker toy
designed to hold a TV antenna. Be careful.

You may get lucky and get away with something. But from time to time, there is a
post about someone being killed on a tower.

- - . . .   . . . - -     .   . . .     - - .   . - . .

73, Guy
k2av@contesting.com
Apex, NC, USA

----- Original Message -----
From: Tom Wagner <tomwagner@mindspring.com>
To: Dave H. <wiseguy@attitude.com>; <towertalk@contesting.com>
Sent: Saturday, October 09, 1999 9:06 AM
Subject: Re: [TowerTalk] newbie, Installing a 80' crank up .



Dave --

You own a dangerous tower.

Sorry to point this out, Dave, but your tower is not  very strong.
Go to http://www.ustower.com/selfsupport.html
and look at the weights and section sizes for a US Tower.
The weight of a 72' light-duty tower is 1040 lbs.  The base
face width is 21 5/8" .  Tower strength increases greatly with
face width (probably cube or 4th power - a PE would know).

Note


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>