Towertalk
[Top] [All Lists]

[TowerTalk] Yaesu G-2800 and G-1000 fit in Rohn 25?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Yaesu G-2800 and G-1000 fit in Rohn 25?
From: jimi@designet.com (Jim Idelson)
Date: Tue, 5 Oct 1999 09:25:23 -0400
Do either or both of these rotors fit inside Rohn 25? I would be replacing a 
Ham IV mounted at the point in the tower where the top section meets the next 
section down. The lowest horizontal rung of the top section has already been 
removed to accommodate the HAM IV.

And, do you know if anything needs to be done in terms of redrilling the rotor 
plate?

73,

Jim K1IR

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Yaesu G-2800 and G-1000 fit in Rohn 25?, Jim Idelson <=