On Sat, 02 Oct 1999 16:59:36 PDT wa4dou@excite.com writes:
> ............
> When i learned that i would need to break
up the guys with insulators, in order to shunt feed the tower, i ordered
enough insulators and preforms to do it every 13-14 ft............
You did not say if this was the length of guy wire you will use or
the spacing between insulators. In either case, the self resonance
is very close to 10M and may act as a director on that band, especially
if that represents the wire length which will be end loaded by the guy
grips. For this reason, I use 12 ft between insulators close in to the
tower, after the first insulator which is spaced 3 to 4 ft from the
tower.
de Tom N4KG
___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|