Towertalk
[Top] [All Lists]

[TowerTalk] XM-240 Dimension Error

To: <towertalk@contesting.com>
Subject: [TowerTalk] XM-240 Dimension Error
From: paul.baldock@checksum.com (Paul Baldock)
Date: Thu, 16 Sep 1999 14:12:07 -0700

I put mine up according to the manual - what else would you exepect! I
bought it about 4 months ago, with no mention of a manual error.

It has minumum SWR abou 7.075  instead of the spec of 7.025. It's easier to
live with that rather than take it down.

However, the f/b on my XM240 is almost non existent. I assumed this was
because I have it 11 ft above the TH-11. Could this poor f/b infact be the
dimension error?

Paul





Paul Baldock
CheckSum Inc
PO Box 3279
Arlington, WA 98223

Phone 360 435 5510
Fax   360 435 5535
EMAIL paul.baldock@checksum.com
WEB   http://www.checksum.com


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>