N2NU@aol.com wrote:
>
> I have a telrex rotor with a 1/3 hp motor into a gear reduction box. On the
> side of the box it says fill with "600W Oil" on a plate. In the the manual,
> it says fill with "#20 non-detergent oil" I am not familiar with either of
> these classifications. Anyone out there have any ideas?
Non-detergent single-duty oil is often specified in applications where
the oil is rarely changed. My guess is that it is a more stable product.
It can be found at most auto supply stores.
I use 80/90 wt. gear lube in my Telrex because I've got a slow
bottom bearing leak - the heavier oil allows yearly refilling
instead of monthly. A slow leak isn't all bad - it keeps the
chain oiled!
--
Steve K8LX
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|