Towertalk
[Top] [All Lists]

[TowerTalk] Rohn HDHBX Installation Manual

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rohn HDHBX Installation Manual
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Thu, 22 Jul 1999 10:47:06 EDT
In a message dated 99-07-21 20:35:43 EDT, rhiker@uswest.net writes:

> Also, I plan on digging a 3'x3'x6' hole for the base. I have ordered 4000psi
>  cement. I plan on filling the 1st foot of the hole with sand or gravel. Any
>  feedback on this. Is this an overkill?

      NO - in fact it's way UNDERKILL. Where's your Rohn book? The factory 
spec calls for 5'9" x 5'9" x 4' for 4.9 cubic yards of concrete. Your hole 
will have 2 yards. This is a big violation of the LXC Prime Directive to "DO 
what the manufacturer says".

      You don't need any sand or gravel for drainage at the bottom. There's 
nothing to drain. 

Cheers,   Steve   K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>