In a message dated 99-07-21 12:19:49 EDT, K7NV@contesting.com writes:
> ASTM A 475 lists 3/8 EHS at 15400 Lb min breaking strength.
> So if you are trying to get a strength equivalent look for HPTG 15400
> Phillystran.
> They also make 20800, 27000, 35000, 42400, 58300....up to 160000
Kurt is right as usual. The original question was in regard to 25G. 3/8"
EHS is NOT a factory specified material for Rohn 25G. Use of 3/8" EHS with it
should be done with caution and is a violation of the LXC Prime Directive of
"DO what the manufacturer says".
Cheers, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|