Towertalk
[Top] [All Lists]

[TowerTalk] computer niise

To: <towertalk@contesting.com>
Subject: [TowerTalk] computer niise
From: k9fd@htc.net (Merv Schweigert)
Date: Fri, 2 Jul 1999 17:30:02 -0500
Using a CTX 17" here sitting tight against the FT1000, no noise
from the monitor, have some noise from the printer cable that
runs behind the 1000, need to put some toroids on that cable..
Your mileage may vary..  73 Merv K9FD


>
>I have a MAG 17 that seems to be reasonably clean.
>That is I have not noticed any garbage of the Ham Radio (FT1000) which is
on
>the same 110V line
>
>K6EXO
>
>----- Original Message -----
>From: Richard Brown <rjbro@bellsouth.net>
>To: <towertalk@contesting.com>
>Sent: Friday, July 02, 1999 8:59 AM
>Subject: [TowerTalk] computer niise
>
>
>>
>> Where would it be proper to post a question as to what brand of a  17"
>> computer monitor  i could buy that does not wipe out  the HF bands every
>> 40khz? My  Micron  monitor that came with my Micron computer  is getting
>> worse every day.  Tnx Cary W4ccb
>>
>>
>> --
>> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>> Submissions:              towertalk@contesting.com
>> Administrative requests:  towertalk-REQUEST@contesting.com
>> Problems:                 owner-towertalk@contesting.com
>> Search:                   http://www.contesting.com/km9p/search.htm
>>
>>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>