> In regards to the balun, how does it work when the impedance of
> the line keeps changing? If you use a 4/1 balun, some
> frequencies will be 300 ohm impedance and it will work, but at
> some frequencies, the impedance will be as high as 2000 ohms, and
> it seems that would be kind of hard on the balun if you're
> running any power. 73
> Tom W7WHY
------------------
Tom,
A 1:1 choke balun is called for and a very short length of coax
to the tuner.
73, Bob, W5AH
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|