I'm constructing a remote antenna relay system and will be putting bypass
capacitors and protection diodes across each of the relay coils.
Question: Is it important that the caps and diodes be soldered directly to
the relay coils or can they be mounted on a small circuit board and
connected to the relays via wires?
thanks &
73 James / k1sd
Rhode Island
>> setzlerjm@code80.npt.nuwc.navy.mil <<
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|