Towertalk
[Top] [All Lists]

[TowerTalk] 50:75 ohm transformation

To: <towertalk@contesting.com>
Subject: [TowerTalk] 50:75 ohm transformation
From: n4zr@contesting.com (Pete Smith)
Date: Wed, 10 Feb 1999 12:44:35 +0000
At 06:29 AM 2/10/99 -0500, L. B. Cebik wrote:
>>
>Mike is exactly right.  I failed to note--although the article makes
>clear--that the series matching system using transmission line sections is
>a monoband matching scheme.  For triband and other wide band use, ununs
>are preferable.

Except that they introduce several additional connectors into the line,
each of which is a likely failure point.  As someone pointed out, you can
always make the 75-50 ohm transition at a convenient half-wavelength point,
and run the rest of the way with 50-ohm coax, so the length issue really
isn't terribly awkward.

73, Pete Smith N4ZR
n4zr@contesting.com 

Loud is.

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>