>
>Howdy!
>
>What is the best way to switch 5 antennas between 2 rigs. I've
>been trying to figure it out without having to use to many
>switch's etc.
>What I had figured was a 5 position box from each radio with a
>switch in each feedline going to one box or the other. There
has
>to be an easier way to do it than that.
Hi, Tom.
There is...with one rotary and one toggle switch.
Check out my website....
http://www.hal-pc.org/~kg5u/2RADCTLR.HTML
I have a schematic of my antenna switch controller on a link on
that page. I built it for my 2-radio contesting activity. Bear
in mind that I run QRP and as a consequence I did not have to
observe much in the way of isolation...YMMV for higher power
levels....
73,
Dale Martin, KG5U
kg5u@hal-pc.org
http://www.hal-pc.org/~kg5u
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|