No, But I would go for some water proof stuff. I like wheel bearing
grease that is made for boat trailers axle bearings.
Which method got them out.
Art
KB7WW
gbay wrote:
>
> Thanks for all the input concerning the sheared off bolts in my Ham-IV
> rotator. The unit is off the tower and I've got the bolts out. Now to
> reassemble everything. I've followed the thread about using lock-tite.
> However, the manual says to use grease and so does the local machine shop.
> Anything wrong with using plain old grease on the threads?
>
> Thanks for the help.
>
> Gerry, W1XY
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|