[TowerTalk] Prop Pitch Speed Up

Towertalk

[TowerTalk] Prop Pitch Speed Up

To:	<towertalk@contesting.com>
Subject:	[TowerTalk] Prop Pitch Speed Up
From:	K7LXC@aol.com (K7LXC@aol.com)
Date:	Thu, 14 Jan 1999 22:00:51 EST

In a message dated 99-01-14 20:48:13 EST, w7why@harborside.com writes:

> Here's something I found in the 1949 June QST that might
>  be of some interest to the guys with prop pitch motors.
>  The article was "Speeding up prop pitch beam rotors"

      YIKES! That's about the worst thing you can do to a prop pitch IMO. You
lose the gear reduction braking among other things. 

Cheers,  Steve    K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] Prop Pitch Speed Up, Paul Nyland [TowerTalk] Prop Pitch Speed Up, dan hearn [TowerTalk] Prop Pitch Speed Up, dan hearn [TowerTalk] Prop Pitch Speed Up, K7LXC@aol.com <= [TowerTalk] Prop Pitch Speed Up, Merv Schweigert [TowerTalk] Prop Pitch Speed Up, Tom Osborne [TowerTalk] Prop Pitch, Peter [TowerTalk] Prop Pitch Speed Up, KJ6Y@aol.com [TowerTalk] Prop Pitch Speed Up, Tom Osborne [TowerTalk] Prop Pitch Speed Up, GALE STEWARD

Previous by Date:	[TowerTalk] What a multiband vertical?, DavidC
Next by Date:	[TowerTalk] More on trimming the 75 ohm hardline, Steve Zettel
Previous by Thread:	[TowerTalk] Prop Pitch Speed Up, dan hearn
Next by Thread:	[TowerTalk] Prop Pitch Speed Up, Merv Schweigert
Indexes:	[Date] [Thread] [Top] [All Lists]