In a message dated 98-12-15 08:57:34 EST, mlowell@noclant.navy.mil writes:
> >2) If preform grips are used, the thimble size is 1/8" larger than the
> >wire.
This is not true. Here are the strand sizes and factory recommended
thimble sizes:
3/16" EHS 7/16-3/8" thimble
1/4" EHS 1/2" thimble
5/16" EHS 1/2" thimble
> >
> >3) If 4000lb Phillystran is used with Preform Grips, the thimble is
> >7/16".
This is correct but you're not using Phillystran.
> >
> >4) If 6700lb Phillystran is used with Preformed Grips, the thimble is
> >1/2".
This is also correct but you're still not using Phillystran.
> >
> >5) If Phillystran is used with cable clamps (highly not recommended) use
> >one size smaller than above.
Cable clamps and Phillystran do not mix anymore.
> >
> >In all cases the heavy duty version of the thimble is used.
>
> This indicates that I need 3/8" thimbles....
Use the 1/2" ones as per above.
Cheers, Steve K7LXC
Tower Tech
Champion Radio Products
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|