In a message dated 98-11-03 10:35:25 EST, aa2gs@isoc.net writes:
> Is there another point higher up on the lower tower section that a wire
> rope could be attached, rather than the point used for the rasising fixture
> (which I don't have)?
For what purpose? Why? Hip-pocket engineering is NOT a good idea.
>
> I have a convenient tree nearby that I have a line going to through a
pulley.
>
What does this do? Does it have something to do with the above question?
>
> This also brings up another point...how does one attach ground line for
> grounding to ground rod
Mechanical clamp or exothermic like a Cadweld.
> and secondly how can I mount my polyphaser isolater
> for the rotor control cable?
At your Single Point Ground system which should be at your cable
building entry. Are you building a ground system or just installing the
isolater? A ground system is worthwhile while just installing the isolater
without a ground system is mostly a waste of time and money.
Cheers, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|