Towertalk
[Top] [All Lists]

[Fwd: [TowerTalk] To Rivet or not to Rivet?]

To: <towertalk@contesting.com>
Subject: [Fwd: [TowerTalk] To Rivet or not to Rivet?]
From: n3rr@erols.com (Bill Hider, N3RR)
Date: Sun, 11 Oct 1998 15:49:41 +0100
This is a multi-part message in MIME format.
--------------D8F28EC42870936A209A3EBA
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit



--------------D8F28EC42870936A209A3EBA
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Message-ID: <3620C567.CE13B407@erols.com>
To: <towertalk@contesting.com>
Date: Sun, 11 Oct 1998 15:49:11 +0100
From: "Bill Hider, N3RR" <n3rr@erols.com>
Reply-To: n3rr@erols.com
X-Mailer: Mozilla 4.04 [en] (Win95; U)
MIME-Version: 1.0
To: Scott Bullock <sales@advantagecomm.net>
Subject: Re: [TowerTalk] To Rivet or not to Rivet?
References: <3.0.3.32.19981011092235.007cf230@mail.webss.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

On both of my 40 2-CDs, I added two stainless steel rivets at each element
joint and aluminum rivets to the boom joints.  I put them in on different,  90
DEG rotated planes.  That is, one rivet pointed "down", the other pointed
"horizontal".  I allowed 3 inch spacing between rivet planes.  I used 1/8  inch
dia. rivets for the elements and 1/4 inch dia. rivets in the boom. For each,
the rivet pull depended on the amount of material into which the rivet was
installed.

I do this on all of my antennas.

See my web page: http://www.erols.com/n3rr

73
Bill, N3RR


Scott Bullock wrote:

> That is the question.....
>
> XM240 elements mostly assembled now-Anyone think of any drawbacks to adding
> an aluminum rivet to each joint along with the hose clamp? Just thinking it
> might make a better electrical contact and eliminate any possibility that
> an element tip could slide out when laden with ice.
>
> Really impressed with the quality of the parts and machining on this
> antenna! Everything has fit the first time so far and is REAL beefy!
>
> Thanks towertalkians!
> Scott
> KA1CLX
>
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm




--------------D8F28EC42870936A209A3EBA--


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [Fwd: [TowerTalk] To Rivet or not to Rivet?], Bill Hider, N3RR <=