Towertalk
[Top] [All Lists]

[TowerTalk] 'preciate the help re pliable rollers

To: <towertalk@contesting.com>
Subject: [TowerTalk] 'preciate the help re pliable rollers
From: dwindk3bhj@fuse.net (David J. Windisch)
Date: Wed, 16 Sep 1998 06:04:50 -0400
TU everyone ... will post further adventures if they merit ... 73, Dave,
K3BHJ.
-----Original Message-----
From: David J. Windisch <dwindk3bhj@fuse.net>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Tuesday, September 15, 1998 7:06 AM
Subject: [TowerTalk] pliable rollers


>
>Need some ideas for replacing the 30+-year-old rollers on my Heights
>crankup-foldover "old men's tower" (they keep the telescoping center
section
>from rubbing against the outer section).  SO, they gotta be sturdy and
>pliable.
>OD is about 1-5/16", ID is about 5/8", width is about 1-1/8".
>Any ideas on sources for materials?  I can get the (if needed) machining
>done here in Cincinnati.
>TIA -- 73, Dave, K3BHJ.
>
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] 'preciate the help re pliable rollers, David J. Windisch <=