Towertalk
[Top] [All Lists]

[TowerTalk] Rope End Sealing

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rope End Sealing
From: jimsmith@ns.net (Jim Smith)
Date: Tue, 15 Sep 1998 16:56:56 -0700
    Hi Terry,
one method I've seen that works great is to use a small piece of heat shrink
tubing on the end.
Jim Smith
KQ6UV

-----Original Message-----
From: Terry Sharar <terrys@romulus.ncsc.mil>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Tuesday, September 15, 1998 4:37 PM
Subject: [TowerTalk] Rope End Sealing


>
>All,
>
> I recently bought some 3/8 inch braided dacron rope to use with a
>gin pole. I'd like to receive some suggestions on the best way to seal the
>rope ends, something better than the black electrical tape the vendor
>used.
>
>73,
>
>Terry Sharar
>WB3DSB
>
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>