Towertalk
[Top] [All Lists]

[TowerTalk] Rohn 25 House Bracketing

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rohn 25 House Bracketing
From: w7ni@teleport.com (Stan Griffiths)
Date: Sat, 12 Sep 1998 02:51:08 -0700
Hi Jim,

Yes, I have seen the EB2525G installed before and the steel material is as
strong as any of the house brackets.  If there is a weak point, it is in
what you attach it to on the house.  To make it strong enough, you might
have to put in a few extra braces in the eaves.

Stan  w7ni@teleport.com

Jim Idelson wrote:

> Stan,
>
> Thanks for responding. I looked at the photo of the EB2525G, and my
> first reaction that it might not provide enough rigid strength for the
> application. It looks like it might fit, but do you have any experience
> with that hardware?
>
> 73,
>
> >
>
> > Jim Idelson wrote:
> > >
> > > I can't be the first to have asked this question . . .
> > >
> > > I will be placing 80 feet of Rohn 25 next to the house. The lowest
> guy point will be replaced with a house bracket. Two sets of guys will
> be placed above [at 50' and 75']. Here's the hitch - the guy anchor
> points require that the tower be oriented so that a SIDE of the tower
> is PERPENDICULAR to the side of the house. As far as I can tell,
> standard house brackets from Rohn are designed to attach to two legs of
> the tower that are the same distance from the side of the house -
> meaning that a SIDE o
> > >
> > > Can the Rohn Universal House Brackets be used to handle this tower
> orientation? Or, what other approaches should be considered?
> > >
> > > Thanks for your help . . .
> > >
> > > Jim K1IR
> .>
>
> Hi JIm,
>
> I would consider using the Rohn EB2525G Universal Eave Bracket.  It is
> actually two brackets that each hold one tower leg and they can be
> positioned separately.
>
> Stan  w7ni@teleport.com
>
>  <
>
> Jim
>
> -----------------------------------------------------------------------
> -----
> DesigNET International:  The Information Resource for Conferencing
> Professionals
> -----------------------------------------------------------------------
> -----
>
> James S. Idelson
> President
> DesigNET International, Inc.
> 96 Morse Road
> Sudbury, MA 01776
>
> E-mail: jimi@designet.com
> Phone:  978.443.5549
> Fax:    978.443.2034
> Pager:  508.395.2275
> Video:  978.579.6980 and 978.579.6981 (2B)
> Web:    http://www.designet.com

--
66'9k'?:'<@'7:'h;'jj'7:'8m'=;':h'j@'@7'?i'=9'm<'jh



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>