Thanks Kurt,
But what I was wondering about was do you need that on a 100 foot R25? I know
that
Rohn specs are shaby, but they dont spec them for 100 foot.
I've erected many towers and we build a bracket that bolts together to attach
the
guys to. I looks good and spreads the pull across all of the uprights. Never
pulling directly on an upright or a Z-bar.
I think that people need to remember that rigid in not strong. Let me say that
again, " If it dont move it will break".
Kurt Andress wrote:
> Lee wrote:
>
> > Why no torque arms? Also what do you mean by, "two top guys / anchor"?
> > Do
> > you mean double the top guys?
> >
> > Lee
> >
>
> Hi Lee,
> I think Steve Sawyers is referring to a TA25 Torque Arm Stabilizer, which
> allows
> for the attachment of 6 guys that terminate on the 3 anchors. This is a vastly
> superior torque stabilizer than using the torque bars. You can find it on the
> 25G
> accessories page.
>
> 73, Kurt
>
> --
> YagiStress - The Ultimate Software for Yagi Mechanical Design
> Visit http://www.freeyellow.com/members3/yagistress
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|