This is definitely NOT normal behavior. I have G1000 & G2800, and the speed
controls both directions.
73 de Jeff K2KV
-----Original Message-----
I bought a used Yaesu G-1000SDX at a hamfest earlier this year with no
manual. Thanks to the friendly folks here on the TT reflector I was able to
get the cable connections sorted out and the rotator is turning now. The
G-1000 has a "speed control" . My question is this when turning clockwise
the speed control does in fact control how fast the rotator turns, however
in the counterclockwise direction the speed control has no effect at all,
it apparently only has one speed in reverse and thats slow. Is this normal
behavior for the G-1000 or do I need to pull it apart and look for a
problem?
Dave
K9NX
n7ex@athenet.net
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|