In a message dated 98-07-26 22:33:01 EDT, wd3q@erols.com writes:
<< Do I attach the individual leads of the rotor cable directly to
the terminal strip or do I use crimp-on lugs (I'm not
particularly interested in digging into the bell to put on one
of those Rotor Doctor 8-pin plugs)? I'm worried about
waterproofing, or at least keeping the terminal strip relatively
dry and not having the cable come loose or undone >>
I prefer to use crimp-on spade lugs. They're easy to install on the
rotator.
If you're worried about wx and the terminal strip, apply some Liquid
Electrical Tape directly to the terminal strip. It does an excellent job of
protecting the connections. Available from Champion Radio Products
(http://www.championradio.com).
Cheers, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|