This is a multi-part message in MIME format.
--part0_897106685_boundary
Content-ID: <0_897106685@inet_out.mail.aol.com.1>
Content-type: text/plain; charset=US-ASCII
--part0_897106685_boundary
Content-ID: <0_897106685@inet_out.mail.aol.com.2>
Content-type: message/rfc822
Content-transfer-encoding: 7bit
Content-disposition: inline
From: N0OEL@aol.com
Return-path: <N0OEL@aol.com>
To: wa6ibu@earthlink.net
Subject: Re: [TowerTalk] Mast-mounted rotors and assy
To: <towertalk@contesting.com>
Date: Sat, 6 Jun 1998 00:15:29 EDT
Mime-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Yep. As I recall HyGain specs say 6 sq ft for mast mounted rotors. And
thats the Ham M, II, III, and IV.
Warning. 9.5 sq ft could tear your roof off on a tripod. Be sure you do
some super guying.
Good luck.
73
Mike
K0BUD
--part0_897106685_boundary--
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|