> >I'm intrigued by the prospect of not having to fuss with tuning every
> >time I change frequencies and especially not having to obnoxiously
> tune
> >up on the air.
>
> Unless you have a 50 plus or minus j zero ohm DC to light antenna, you
>
> are gonna have to fuss with an antenna tuner as you move about, Dave.
> .
>
Not necessarily. Most solid state amplifiers can operate into a 2:1 vswr
or less with no problems. This means no tuning for me.
> . If hams had been using solid state linear amplifiers since 1910,
> and
> some scientist invented a temperature-resistant, rebuildable device
> that
> was 25% more efficient, and did Not require the use of an antenna
> tuner,
> it would widely hailed as a technological breakthrough.
>
I doubt it. Considering the fact that most tube amps have to be tuned on
the air...and rebuilt from time to time.
> >So, I'm looking into designing and building a 1-1.5kw broadband solid
> >state amplifier that needs no tuning, and considering using Motorola
> >MRF-150s and combiners.
>
> Why not use two, 50v MRF-430 FETs in Class AB1 push-pull - and you
> won't
> need combiners? Motorola has info sheets on the MRF-430.
>
Mainly because MRF-430s are obsolete and no longer manufactured
and are bipolar devices which have lower gain and generally higher IMD
than FETs.
But, thanks anyway
Dave
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|