On Mon, 06 Apr 1998 15:58:30 -0400 "George M. Roberts" <kn4ab@home.com>
writes:
>I just picked up some used Rohn 25 and a 25AG5 top section.
>This top section from what I measure is 2.5" id. What size mast is
>this top secion made for? If I want to use a 2" mast does anyone sell a
>sleeve for it?
>
>SNIP<
>
>Thanks for help.
>
>73, George KN4AB/2 New Jersey
A simple sleeve / shim can be made with PVC. Simply cut off a short
piece of appropriately sized PVC, cut it lengthwise, place around
the mast and slide into the tower collar. Leave a few inches exposed
above the tower collar and hold in place with a hose clamp.
de Tom N4KG
_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|