I'm thinking of:
90 foot Rohn 45 tower
40 meter beam
KT34XA
wire on 80 & 160
1. For the 40 meters, I have a choice. Would you go with 3 element KLM or
Cushcraft 2 element 402CD? If the 3 element KLM, some (KJ6Y & W7ZRC)are
saying that the KT34XA tribander likes to be on top with parallel booms;
that would be ~ 90+ feet with the 40 meters about 10 feet below it at about
80 feet. I don't know. Is the extra db worth it? Do you have any comment
on what should go on top?
2. Or should I just stick with the beefed up Cushcraft? If 402CD & KT34XA,
who is on top? KLM says spacing is OK at 8 feet or more.
The one on top will be on a mast rotated with a T2X. The lower one will be
on a ring rotor. 402CD on top?
3. I also want to get on WARC and was thinking of a ring rotated HiGain DB
1217 beam. Is the best place for this below everything at about 60-70 feet?
Any help would be appreciated. I can model the antennas but I am more
concerned with interaction at this point.
Any practical experiance? Thanks in advance.
73, Bruce Makas, K1MY
Cape Elizabeth, Maine
207/767-8150
k1my@nlis.net
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|