When I turn my opener off, my KW does not faze it, but there is some
tendency to phase it if the lines are in phase. K4VUD
> >
>
> Yep.
>
> Cured mine with a 10 Mh rf choke (J.W. Miller part #6306 About $3) on each
> line of the doorbell button wire right where the line attaches to the door
> opener.
>
> You may want to remove the doorbell wire (used to open without the remote)
> from the unit and see if your problem is RF on the wire.
>
> 1500 watts out does not phase it now.
>
> Good Luck.
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|