To All,
While I have put up a number of towers before, this will be the first
with rebar in the base. I will soon be putting up a self supporting
25G. The Rohn drawings require the use of rebar in the base--which of
course I will do. However, I have never had the occasion to use the
stuff before, and am curious whether any of you have any tips or
techniques that you might like to pass on.
I am particularly interested in opinions as to whether the rebar should
be allowed to come in contact with the tower base section or not. I
know one manufacturer prohibits it, apparently out of concern that the
probability of concrete damage from a lightning strike would be
increased. But unless I missed it somewhere, Rohn doesn't say.
Obviously, it would be a lot easier to install if touching the base
section were permissible.
Thanks, all input is appreciated.
73 Malcolm KR4HP
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|