At 10:24 AM 1/28/98 -0500, you wrote:
>I want to mount an R7 vertical onto the back of my shed using house
>mount brackets. I have a 1.75" OD mast that I will be using as the
>base. I looked at the Radio Shack brackets, that the catalog says
>will take 1.75" OD mast, but they certainly don't, way too small.
>
>Where can I find good set of house mount brackets that will accomodate
>1.75" to 2" OD mast? I'd prefer "checkbook engineering" [(c) K1VR] on
>this one.
>
>Thanks - Jim Reisert AD1C
>AD1C@contesting.com
Screw in a a 2x4 about 2 foot wide to the house...then use Plumbers Tape to
mount the mast to the 2x4. Use lag screws on the plumbers tape. Make sure
you secure the bottom. I usually use a red brick with a holes...drive a
pipe in the ground at the bottom about two feet down and slip the mast over
the pipe.
Won-t move for years.
Lee
k0wa@southwind.net
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|