The cable you have is a 78 or 100 ohm twinax cable. It is used in
conputer localtalk applications for IBM system 3X/AS400 and other
computer systems.
Bruce WB4AYN
>----------
>From: DavisRFinc@aol.com[SMTP:DavisRFinc@aol.com]
>Sent: Saturday, January 24, 1998 10:19 PM
>To: QCS0041@InfoAve.Net
>Cc: n8ug@juno.com; towertalk@contesting.com; Orion@connriver.net
>Subject: Re: [TowerTalk] RG-22B coax
>
>In a message dated 98-01-24 10:06:10 EST, you write:
>
><< give it a shot!
> Press Jones, N8UG, The Wireman, Inc. >>
>
>Kent, if you would, please advise Press or myself as to your results. I'm
>curious because we carry RG22B for various non-RF applications. One thing
>you
>might notice working with this is that you'll run into a "talcom powder"
>residue. In fact it's a very similar compound to talc powder, introduced
>during the production process to eliminate sticking of the PE insulation on
>the inner conductors to the PE dielectric. Some get worried when they see it
>thinking its degradation, etc. Good luck! Steve Davis, K1PEK , DAVIS RF
>Co. and "The Triad": DAVIS RF/ORION WIRE/WIREMAN
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|