This is a multi-part message in MIME format.
--------------E351DE4CAB269C0BDC83AA1D
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Why not use 9913F? It has loss characteristics similar to 9913 and uses
a stranded center conductor. The outer insulation is also much more
flexible. Might just fit the bill.
JCCR/TV, Inc. wrote:
>
> If this is a stupid question, please forgive me in advance. I have 9913
> going from the shack out to the tower site. I don't want to run the 9913 up
> a crank up because it's probably too rigid and would be damaged from the
> lowering/raising motion. Can I use RG-213 or 8 from the antennas down the
> tower and connect it to the existing 9913 that goes up to the shack? I've
> never mixed coax before, hence my question: Is there a problem with velocity
> factor/or capacitance/or signal loss mixing coax?
>
> Jim KS1A
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search
--------------E351DE4CAB269C0BDC83AA1D
Content-Type: text/x-vcard; charset=us-ascii; name="vcard.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for John E. Kemker III
Content-Disposition: attachment; filename="vcard.vcf"
begin: vcard
fn: John E. Kemker III
n: Kemker III;John E.
org: Tripoli Atlanta Rocketry Association
email;internet: kemkerj@xyzzy.net
title: KF4MZD
note: TRA #2499, TARA #002, SMIRK #6185
x-mozilla-cpt: ;0
x-mozilla-html: FALSE
version: 2.1
end: vcard
--------------E351DE4CAB269C0BDC83AA1D--
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|