Towertalk
[Top] [All Lists]

[TowerTalk] Yaesu Rotors

To: <towertalk@contesting.com>
Subject: [TowerTalk] Yaesu Rotors
From: n4zr@contesting.com (Pete Smith)
Date: Sun, 23 Nov 1997 18:52:36
At 02:56 PM 11/22/97 -1000, Jim Reid wrote:
>At 07:20 PM 11/22/97, you wrote:
>>Are the mounting holes in a Yaesu rotor the same as the ones in a Hygain
>>Tailtwister or Ham IV, or do you have to drill new ones in the rotor plate?
>>
>
>Aloha,  No,  they are not the same.  The Yaesu uses 90 mm
>hole diameters on a circle of a diameter of 119 mm,  of
>all the crazy dimensions!! 


Hmmm ...  but my Yaesu bolted right onto my (new purchase in 1995) Rohn
rotor shelf.
Guess they're drilled for more than one pattern now - I wondered why those
other holes were there.

73, Pete Smith N4ZR
n4zr@contesting.com 

"That's WEST Virginia.  Thanks and 73"

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>