Hi,
I have for sale the following two pieces of apparently 6061-t6 plate.
The
plate is suitable for the mast to boom plate for large yagi antennas,
amoung
other purposes.
Plate 1 is .375 thick, and is 14 5/16 " by 8 9/16 " . The plate is
undrilled and is a solid piece cut retangular. I m asking $18 for this
plate
plus shipping.
Plate 2 has been cut and drilled on. Its .25 inches thick. With
further cuts
it can be made into either a 10" by 9 1/8" solid retangular piece or a
13" by
6 1/2 " solid retangular piece. I m asking $12 for this piece, plus
shipping.
If interested in either of these plates, please contact me at:
(630) 778-0793, or email wb9mjn%wb9mjn.ampr.org@uugate.aim.utah.edu .
--
73, Don.
AMPRNet : wb9mjn@wb9mjn.ampr.org[44.72.98.19]
Internet: wb9mjn%wb9mjn.ampr.org@uugate.aim.utah.edu
Website: http://www.qth.com/antpanel
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|