K7LXC@aol.com wrote:
Does this include welding with oxygen and acetylene with brazing
rod?
> In a message dated 97-11-07 08:01:57 EST, jimnv3v@shore.intercom.net
> writes:> Now that we've discussed using braid as a ground, what are
> the opinions of
> > using #4 or #6 as the ground?
>
> Yes, you want to use a solid copper wire and a #4 or #6 is
> appropriate (I
> haven't looked up what the NEC wants you to use).
>
> The only type of connections you should use to bond the solid wire
> to the
> ground rods are either a compression connection (a bolt on a ground
> clamp or
> similar) or an exothermic connection such as a CadWeld. Nothing else
> is
> acceptable.
>
> 73, Steve K7LXC
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|