Towertalk
[Top] [All Lists]

[TowerTalk] Coax Beads (split), and EZNEC

To: <towertalk@contesting.com>
Subject: [TowerTalk] Coax Beads (split), and EZNEC
From: n7mb@primenet.com (Michael Bill)
Date: Mon, 6 Oct 1997 09:42:17 -0700 (MST)
Dave:

EZNEC by W7EL...

Roy Lewallen, P.O. Box 6658, Beaverton, OR  97007
phone 503-646-2885
fax   503-671-9046
email w7el@eleport.com

73 de mike n7mb

At 11:01 AM 10/6/97 -0400, David Clemons wrote:
>Hi,
>
>       I need to put beads on my coax to prevent the signal from 
>traveling back down the shield.  I cannot use the type which slide over 
>the coax, because the antenna is at the top of the tower.  (I have used them
>at the XCVR and experienced a great reduction in TVI, but I also want to 
>put them up top where they belong.  Does anyone know where I can get the type 
>which will snap around the coax (and what part no.)?
>
>       Also, anyone have the address of where I can get EZNEC?
>
>73, Dave Clemons K1VUT
>
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search
>
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>