In a message dated 97-09-28 22:44:54 EDT, dietz@texas.net writes:
> Do I just "surrender" and use 1/4" clips with the 1/4" thimbles at the
> torque bars? (This is my soloution) or does anyone have a better
> soloution where I can use grips at the torque arms?
How about using a shackle between the torque arm hole and your Preform
thimble? It's the most common "in between" tower hardware coupler. (They're
sometimes called clevises.)
73, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|