Towertalk
[Top] [All Lists]

[TowerTalk] Re: Loos Tension Gauge

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: Loos Tension Gauge
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Thu, 11 Sep 1997 20:04:55 -0400 (EDT)
In a message dated 97-09-11 16:49:23 EDT, k1vr@juno.com writes:

> My guy wires have steel, then the old Phillystran potting head, then HPTG
>  4000.  Does this make a difference to the Loos gauge?  I'll be applying
>  it to 3/16 EHS. 

    You use the Loos to measure the steel guy wire. It's not useful to
measure the Phillystran direct because of the outer jacket on the
Phillystran. The Loos measures the deflection and the Phillystran size skews
the reading.

73,  Steve  K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Re: Loos Tension Gauge, K7LXC@aol.com <=