Towertalk
[Top] [All Lists]

[TowerTalk] Re: Loos Tension Gauge

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: Loos Tension Gauge
From: k1vr@juno.com (Fred Hopengarten)
Date: Thu, 11 Sep 1997 16:48:39 EDT
From:
Fred Hopengarten  K1VR               617/259-0088
Six Willarch Road
Lincoln, MA 01773-5105
permanent e-mail address:  fhopengarten@mba1972.hbs.edu

On Thu, 11 Sep 1997 10:32:27 -0400 (EDT) K7LXC@aol.com writes:

>clicks, etc.). The most practical, accurate and cheapest way to 
>measure the
>tension is with a Loos guy tensioner. TOWER TECH has them for $39.00.


My guy wires have steel, then the old Phillystran potting head, then HPTG
4000.  Does this make a difference to the Loos gauge?  I'll be applying
it to 3/16 EHS. -- Fred

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>