Ragnar Otterstad
email : otterstad@inet.uni-c.dk
Try ferrites on the 12V leads first. If not enough do th same on the mains
cable.
73 Rag OZ8RO
----------
> From: N9YXA-Cedrick Johnson <n9yxa@ix6.ix.netcom.com>
> To: towertalk@contesting.com
> Subject: [TowerTalk] 40M interference
To: <towertalk@contesting.com>
> Date: 15. juli 1997 02:45
>
> I have a problem. When I use 40M CW/SSB, my Radio shack 12V power
> supply powering my 2M equipment. When I key down, the voltage surges
> to around 15 volts, triggering the protection circuit in the
> radio.... Any suggestions on how to cure this problem?
> =========================================
> 73 de N9YXA | Cedrick W. Johnson
> 10X-67368 | Aurora, IL 60506
> http://www.netcom.com/~n9yxa - Main Site
> http://www.netcom.com/~n9yxa/zimbab/
> n9yxa@qsl.net,n9yxa@amsat.org
> n9yxa@ix.netcom.com
> ========================================
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|