>The numbers published in hardware distributors catalogs relate to "Working
>Load Limit". The distributors have no way to know your application and
>publish a number thought to be safe for weight or load bearing applications
>in general on a continuous duty cycle basis. Tower manufacturers, such as
>Rohn, select turnbuckle sizes based on "Breaking Strength" or "Ultimate
>Strength". The 7 strand Extra High Strength guy sizes like 3/16 EHS, 1/4 EHS,
>etc. specified for tower guying are all rated for breaking strength so it is
>logical to also use the same rating for turnbuckles.
Yo, thanks for the info. I assume this goes for other hardware as well. I've
been staying awake nights ever since I put up my tower last year pondering
the strength of the shackles that attach the philly to the torque bars. Near
as I could tell when I put it up the shackles were rated at ~2000 lbs. and
the philly 7000 lbs. Was there a weak link here? Were the shackles the fuse?
Why would Rohn spec it this way. Shrug.
Hasn't come down yet and I guess I'll keep this by the bed to read when I
wake up in a cold sweat on the next blustery tempest laden night.
Matt--K7BG
Matt--K7BG
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|