Towertalk
[Top] [All Lists]

[TowerTalk] Thrust Bearings

To: <towertalk@contesting.com>
Subject: [TowerTalk] Thrust Bearings
From: ksproul@rci.rutgers.edu (Keith Sproul)
Date: Thu, 3 Jul 1997 13:46:28 -0400
I need to know what type of thrust bearings are out there..

I would like to get a bearing that fits over a 2 1/2 piece of pipe alowing
a smaller piece of pipe to rotate inside of it.  I do not have a flat place
to mount the bearing, so it has to mount to the round 2 1/2 inch piece of
pipe..

I know these exist, because I have one for smaller diameter.

Any pointers?

Keith Sproul, WU2Z

Keith Sproul    ksproul@noc.rutgers.edu         WU2Z
Student Housing Network Coordinator             908 445-3695 W
Rutgers University Computing Services           909 821-4828 H



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>