Towertalk
[Top] [All Lists]

[TowerTalk] Guy wire tension guage

To: <towertalk@contesting.com>
Subject: [TowerTalk] Guy wire tension guage
From: Dave_Raymond-CSUS04@email.mot.com (Dave Raymond-CSUS04)
Date: Fri, 20 Jun 1997 9:51:00 -0500
Message authorized by:
    : K7LXC@aol.com@INTERNET at EMAIL

     
        Is there such a thing for 5/16" cable??

73....Dave Raymond, W0FLS

______________________________ Reply Separator _________________________________
Subject: [TowerTalk] Guy wire tension guage
Author:  owner-towertalk@contesting.com@INTERNET at EMAIL
To: <towertalk@contesting.com>
Date:    6/19/97 9:59 PM


Subj:     Tension guage
To: <towertalk@contesting.com>
Date:     06/19/97
To:     ku7y@sage.dri.edu
     
In a message dated 97-06-19 13:23:53 EDT, you write:
     
>  Hi All,
>
>  A while back, I found some message talking about a guage made 
>  for sail boats that people use for guy wires.
>
>  Now I can't find that info again!! 
>
>  Does anyone know where I can buy one and about how much they 
>  are going for now?
>
Hi, Ron --
     
      What you're looking for is the Loos guywire tensioner. The Model 90
measures 3/16 to 9/32 inch cable. It's also accurate and easy to use. TOWER 
TECH has them for $39.00 (+ $5.00 s/h). You can send a check to Box 572, 
Woodinville, WA, 98072.
     
73 and tnx for your interest,  Steve  K7LXC
     
    TOWER TECH -- professional tower supplies for amateurs
     
--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html 
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com 
Problems:                 owner-towertalk@contesting.com
Search:                 http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>