Towertalk
[Top] [All Lists]

[TowerTalk] DCU-1

To: <towertalk@contesting.com>
Subject: [TowerTalk] DCU-1
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Fri, 2 May 1997 10:04:52 -0400 (EDT)
In a message dated 97-05-02 09:58:33 EDT, lbush@eramp.net (Larry Bush)
writes:

> Are the motors for the Tailtwister-D the same as the motor for the T2X? 
>  Can I use a manual control unit for the T2X to control the Tailtwister-D?
>  Any help will be appreciated.
>  
      A TailTwister rotator is a TailTwister rotator.  The DCU-1 digital
controller is the same thing as the analog control box (same 8 wires, etc.),
it just does it digitally.  
Same thing applies to the Ham IV/HamV.  The D-version just refers to the
digital control box.

73,  Steve  K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>