Towertalk
[Top] [All Lists]

[TowerTalk] Cutting EHS?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Cutting EHS?
From: w5ec@digitalexp.com (Hawkins, Bill)
Date: Tue, 22 Apr 1997 22:02:38 -0500
There has to be a better way!
Bill


At 07:24 PM 4/22/97 -0500, you wrote:
>I use a axe and a iron wedge or any metal surface for the guy wire to rest
>on, put the axe on the wire and strike with a 2lb or bigger hammer, works
>quite well!
>Jim K0KM
>
>----------
>> From: Barry Kutner <w2up@bellatlantic.net>
>> To: towertalk@contesting.com
>> Subject: [TowerTalk] Cutting EHS?
To: <towertalk@contesting.com>
>> Date: Tuesday, April 22, 1997 5:57 PM
>> 
>> Hi all - Wonder what everyone uses to cut EHS guy wire? I've tried a 
>> variety including a hack saw (pure torture!) to bolt cutters (put a 
>> nice dent in the jaws). What works best?
>> 73 Barry
>> 
>> --
>> Barry Kutner, W2UP              Internet: w2up@bellatlantic.net
>> Newtown, PA         FRC         alternate: barry@w2up.wells.com
>> 
>> --
>> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>> Submissions:              towertalk@contesting.com
>> Administrative requests:  towertalk-REQUEST@contesting.com
>> Problems:                 owner-towertalk@contesting.com
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>