Towertalk
[Top] [All Lists]

[TowerTalk] rotating a tower

To: <towertalk@contesting.com>
Subject: [TowerTalk] rotating a tower
From: k0gug@juno.com (Jerry K. Liley)
Date: Tue, 25 Mar 1997 08:51:29 EST
I am wanting to contact persons who turn ROHN towers on a ground mounted
bearing.  "Ground mounted",  means the rotor is at or very near the
ground.
Can anyone provide info   (e-mail addresses or phone numbers)   for
persons / companies that make bearings and rings for turning whole
towers?   Not the turning rings that hold the beam.

73, Jerry 

              **************************************************
JERRY  LILEY,  k0gug@juno.com,  Holts Summit, MO  (nr Jeff City)
ARRL Life,  CW Honor Roll,  CW 5BDXCC,  NRA Benefactor Life
              **************************************************

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] rotating a tower, Jerry K. Liley <=