I recently acquired a TB3 thrust bearing that had been in service for
several years. When I removed it from the tower it was not turning smoothly;
seemed like there was either serious dirt in there or perhaps busted bearings.
I'll try a simple cleaning first, of course, but if there is internal damage
I was wondering if these can be rebuilt?
73/Jon AA1K
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|