Hello all I wonder if anyone can help with a little info.
I have a TH7DX at 75 feet with a 402-CD mounted about 12ft above. Both =
booms are in the same plane.
1. The 15m swr curve seems to mimic the plot for normal settings shown =
in the manual but I have assembled it to the DX setting ( in fact the =
only setting given in the manual) can someone confirm the DX dimensions =
RDE-2 =3D838mm FDE-2 =3D 1067mm
2. What power is the BN-86 rated at. Or put another way has anyone =
cooked one.
3. I am at present using a sleve balun in preference to the BN-86. This =
has worked fine on my old 3ele tribander but was wondering if this could =
upset the TH7.
I am not that hung up about the SWR on 15m as it is under 2:1 at the =
bottom of the band however if there is a way to shift the curve a little =
lower it would be nice.
Any other info on your experience with the above setup would be welcome.
73=20
Jan G0IVZ=20
jan.fisher@virgin.net
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|