I had a similiar problem and finally discovered a binding problem i.e. the
pipe was binding in the sleeves that it passed through. I fixed it by
installing a smaller pipe but not before i stripped the ring gear !!
By the way I friend of mine has complained abt a problem like this so it
moght be an inherent characteristic of the T2X. (he odesn't have the same
sleeve arragement that i have.)
73 Frank VO1HP
At 15:44 1996-08-18 -0400, Bill Fisher, KM9P wrote:
>
>I'm turning a 105CA & a 402CD (beefy QHS design) with a T2X. I notice that
>sometimes it will not turn one direction, but turning briefly the other
>direction fixes the problem. Not a big deal... just wondering what's going
>on here?
>
>Bill
> ---------------------------------------------
>| Contesting Online... The ultimate |
>| source of ham radio contest information |
>| http://www.contesting.com |
> ---------------------------------------------
>
>
>
FRANK DAVIS
|