Andy,
I worked VP2VI on April 21st at 02:11utc. VP2VI was very loud here and in the
clear. You appeared to be calling CQ with very few responses. I was using
an InvL at approx 50' vertical for both receive and transmit. Power out was
about 100w and you answered on my first call. I spotted you right after along
with QSX and it didn't seem to really help you out very much. Not sure why as
you were fairly loud here on the InvL.
Thanks for the new country on 160!
73
Jim, KEØL
-----Original Message-----
From: Topband
[mailto:topband-bounces+jfielder=twincitynetworks.com@contesting.com] On Behalf
Of Andree Schanko via Topband
Sent: Tuesday, April 22, 2025 1:14 PM
To: topband@contesting.com
Subject: Topband: 160m CW QSO VP2VI
VP2VI
if you had a CW QSO with VP2VI on 160m , please tell me what did you use as TX
antenna and how much power?
Thanks, Andy DL8LAS @ VP2VI
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|